======================================================
License Agreement for DocuPrint CM305 df PCL 6
======================================================

1. PROPRIETARY RIGHTS: Title, ownership rights, and intellectual
   property rights in the SOFTWARE shall remain in Fuji Xerox and its
   third party suppliers.  You have no rights in the SOFTWARE except
   as expressly granted in accordance with this agreement.
   
2. LICENSE:  Under this agreement, you are granted a non-exclusive
   license to use the SOFTWARE for the purpose of using with
   compatible Fuji Xerox products in your country.  You are
   not permitted to (1) assign, sublicense, sell, rent, lease, convey,
   or transfer the SOFTWARE to any third party by any tangible media
   such as floppy disk, magnetic tape, or CD-ROM, (2) distribute the
   SOFTWARE on a network or by a telephone line available to the
   public or (3) alter, modify, decompile, disassemble, reverse
   engineer, or create derivative works based on the whole or any
   part of the SOFTWARE.
   If any direction on usage or restriction for the SOFTWARE is
   expressly specified in this web site, you are required to follow
   such direction. 
   
3. TERM: This agreement is effective upon installing the SOFTWARE
   until you terminate the agreement by destroying the SOFTWARE.
   This agreement will also terminate if you fail to abide by any
   terms of this agreement.  In case of termination, you must
   promptly destroy the SOFTWARE.
   
4. LIMITED WARRANTIES: THE SOFTWARE IS SUPPLIED STRICTLY ON AN 'AS IS'
   BASIS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR
   FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE.
   YOU ARE RESPONSIBLE FOR CHOOSING, MAINTAINING AND MATCHING OTHER
   HARDWARE AND SOFTWARE COMPONENTS IN COMBINATION OF THE SOFTWARE.
   IN NO EVENT, SHALL FUJI XEROX, FUJI XEROX CHANNEL PARTNERS,
   AUTHORIZED DEALERS AND THEIR THIRD PARTY SUPPLIERS BE LIABLE FOR
   ANY LOSS OR DAMAGE INCLUDING INCIDENTAL OR CONSEQUENTIAL LOSS OR
   DAMAGE, ARISING FROM USE OF OR INABILITY TO USE SOFTWARE, OR ANY
   MODIFICATION OF THE SOFTWARE.  
   
5. EXPORT CONTROL: You are not allowed to export the SOFTWARE in part
   or whole, directly or indirectly, in violation of any restrictions,
   laws or regulations imposed by the government of your country or
   any other relevant countries, and are required to obtain necessary
   approval prior to exporting the SOFTWARE.


=============================================================================
Additional Information:
FUJI XEROX DocuPrint CM305 df PCL 6
Printer Driver Version 2.6.23 for
                    Microsoft(R) Windows(R) XP Professional x64 Edition,
                    Microsoft(R) Windows Server(R) 2003 x64 Editions,
                    Microsoft(R) Windows Vista(R) x64 Editions,
                    Microsoft(R) Windows Server(R) 2008 x64 Editions,
                    Microsoft(R) Windows(R) 7 x64 Editions,
                    Microsoft(R) Windows Server(R) 2008 R2,
                    Microsoft(R) Windows(R) 8 x64 Editions and
                    Microsoft(R) Windows Server(R) 2012.
=============================================================================
This document provides information about the printer driver on the
following items: 

  1. Requirements
  2. Installation
  3. Software Upgrade from the Earlier Version
  4. Limitations


 1. Requirements
=================
   * Please note that this printer driver operates on a computer with a
     64-bit x86-based microprocessor and an upward-compatible processor,
     running x64 Version of Windows(R)XP or Windows Server(R) 2003 or
     Windows Vista(R) or Windows Server(R) 2008 or Windows(R) 7 or
     Windows Server(R) 2008 R2 or Windows(R) 8 or Windows Server(R) 2012.


 2. Installation
=================
   * Refer to the driver user guide provided.  


 3. Software Upgrade from the Earlier Version
=============================================

 [Version 2.6.23]
   * Windows 8 have been supported.


 [Version 2.6.20]
   * Supported Watermarks features, Forms features, and Annotation features.

   * Corrected the problem of documents not being printed from applications 
     and services that operate under the Local System account.

   * Corrected the problem of Multiple-Up information not being registered
     when using FX-manufactured output management software such as job log 
     collecting service.


 [Version 2.6.16]
   * Initial version


 4. Limitations
================
   * Functional Limitations of EMF Spooling
      When [EMF Spooling] of [Detailed Settings] tab is set to [Available],
      the following features may not function normally.
      To use these features, set [EMF Spooling] to [Not Available].
      *[Secure Print][Sample Print]
      *[Enable Account Setup] [Detailed User Settings]
      *[Create/Register Forms]
      *[Separators] of [Separators/Covers]
      *[ICM Adjustment] of [Image Adjustment Mode]
      *[Use Extended Features From Application]
      *[Enable user defined margins]
      *All features of Direct Fax Driver
      For the details of [Annotation] limitations, refer to "Annotation
      features".

      When [EMF Spooling] of [Detailed Settings] tab is set to
      [Not Available], some documents with complex structure may have
      troubles such as distorted
      output image and failure of the output.
      In Windows Vista and Windows 7 environment, documents can be output
      normally.
      Also in Windows(R) XP and Windows Server(R) 2003 environments, documents
      can be output normally by applying SP2.

   * Watermarks features
      In Windows(R) XP SP2, Windows Server(R) 2003 SP2, Windows Server(R) 2008
      and Windows Vista(R), Windows 7 environments, when [EMF Spooling] of
      [Detailed Settings] tab is set to [Not Available], [Watermarks] is not
      available for use by 32bit application software.  
      To use this feature, set [EMF Spooling] to [Available].

   * Annotation features
      In Windows(R) XP SP2, Windows Server(R) 2003 SP2, Windows Server(R) 2008
      and Windows Vista(R), Windows 7 environments, however, even if
      [EMF Spooling] is set to [Not Available], the feature is not available
      for use by 32bit application software.
      To use this feature, set [EMF Spooling] to [Available].
   
   * On Windows 8, Annotation and Watermark may not be printed even if 
     [Annotation] and [Watermark] are specified.
     To make them function, set [EMF Spooling] to [Enabled] on the 
     [Advanced] tab.

   * When printing from the application running in the new UI environment 
     suitable for touch controls, which was introduced on Windows 8, if 
     [Black and White] is displayed as Output Color on the printing setting 
     screen, which is displayed after a printer is selected from the device 
     charm, the output will be in black and white even if the setting is 
     changed to [Color].
     To output in color, open [Devices and Printers] on Windows desktop, 
     right-click on the printer you use to select [Printing Preferences], 
     and in the [Default Setting] dialog, change [Output Color] on the 
     [Paper / Output] tab back to [Color].


=====================================================================
Portions of this software are based in part on the work of the
Independent JPEG Group.

Microsoft is the registered trademark of Microsoft Corporation.
Windows is the registered trademark of Microsoft Corporation.
Other names of products and companies are the trademarks or
registered trademarks of each company.
Copyright 2012 Fuji Xerox Co., Ltd. All rights reserved.
----------------------------< End of File >--------------------------
